- Description
- Reviews (0)
Description
-Simple-to-use graphical interfaces reduce the time required to deploy, troubleshoot, and manage the network and allow you to support sophisticated capabilities without increasing IT headcount.
-The switches also support Textview, a full command-line interface (CLI) option for partners that prefer it.
-Using Auto Smartports intelligence, the switch can detect a network device connected to any port and automatically configure the optimal security, quality of service (QoS), and availability on that port.
-Cisco Discovery Protocol discovers Cisco devices and allows devices to share critical configuration information, simplifying network setup and integration.
-Support for Simple Network Management Protocol (SNMP) allows you to set up and manage your switches and other Cisco devices remotely from a network management station, improving IT workflow and mass configurations.
-The Cisco FindIT utility, which works through a simple toolbar on the user’s web browser, discovers Cisco devices in the network and displays basic information, such as serial numbers and IP addresses, to aid in configuration and deployment.
– 8 10/100/1000 PoE ports with 62W power budget + 2 Combo mini-GBIC ports.
– Performance: Switching capacity 20 Gbps, Forwarding rate 14.88 mpps wire-speed performance.
– Layer 2: Port grouping up to 8 groups, up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation.
– Layer 3: IPv4 routing Wirespeed routing of IPv4 packets up to 1K static routes and up to 128 IP interfaces, Classless Interdomain Routing (CIDR) Support for CIDR.
– PoE: PoE Power Budget: 62 W, Number of Ports That Support PoE: 8.
– QoS (Quality of Service): Priority levels 8 hardware queues, Scheduling Strict priority and weighted round-robin (WRR) Queue assignment based on DSCP and class of service (802.1p/CoS)
SG350-10P Specification
SG350-10P Specification |
|
|
Feature |
Description |
|
Forwarding rate in millions of packets per second (mpps; 64-byte packets) |
14.88 |
|
Switching capacity in Gigabits per second |
20.0 |
|
Power Dedicated to PoE |
62 W |
|
Number of Ports That Support PoE |
8 |
|
Total System Ports |
10 Gigabit Ethernet |
|
RJ-45 Ports |
8 Gigabit Ethernet |
|
Combo Ports (RJ-45 + SFP) |
2 Gigabit Ethernet combo |
|
Packet Buffer |
12Mb |
|
Spanning Tree Protocol (STP) |
|
|
Port Grouping |
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
|
|
Virtual Local Area Network (VLAN) |
|
|
Voice VLAN |
|
|
Multicast TV VLAN |
Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs, also known as Multicast VLAN Registration(MVR) |
|
Q-in-Q VLAN |
VLANs transparently cross a service provider network while isolating traffic among customers |
|
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) |
Protocols for automatically propagating and configuring VLANs in a bridged domain |
|
Unidirectional Link Detection (UDLD) |
UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks |
|
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 |
Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 |
|
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping |
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1K multicast groups (source-specific multicasting is also supported) |
|
IGMP Querier |
IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
|
Head-of-Line (HOL) Blocking |
HOL blocking prevention |
|
Jumbo Frame |
Up to 9K (9216) bytes |
|
IPv4 routing |
Wirespeed routing of IPv4 packets Up to 512 static routes and up to 128 IP interfaces |
|
Classless Interdomain Routing (CIDR) |
Support for CIDR |
|
Layer 3 Interface |
Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface |
|
DHCP relay at Layer 3 |
Relay of DHCP traffic across IP domains |
|
User Datagram Protocol (UDP) relay |
Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP packets |
|
DHCP Server |
Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options |
|
Dimensions (W x H x D) |
SG350-10, SG350-10P, SG350-10MP: 11 x 1.45 x 6.7 in. (279.4 x 44.45 x 170 mm) SG355-10P, SG350-28: 17.3 x 1.45 x 10.1 in. (440 x 44.45 x 202 mm) SF350-48, SG350-28P, SG350-28MP: 17.3 x 1.45 x 10.1 in. (440 x 44.45 x 257 mm) SF350-48P, SF350-48MP: 17.3 x 1.45 x 13.78 in. (440 x 44.45 x 350 mm) |
|
Power |
100-240V 50-60 Hz, internal, universal: SF350-48P, SF350-48MP, SG350-28MP, SG350-28, SG350-28P, SG350-28MP 100-240V 50-60 Hz, 0.7A, external: SG350-10 100-240V 50-60 Hz, 1.5A, external: SG350-10P 100-240V 50-60 Hz, internal, universal: SG355-10P 100-240V 50-60 Hz, 2.0A, external: SG350-10MP |
|
Certification |
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
|
Operating Temperature |
SG350-10, SG350-10P, SG355-10P, SG350-10MP, SG350-28, SG350-28P, SG350-28MP 32° to 104°F (0° to 40°C) SG350-10MP, SG350-10P, SG350-28P 32° to 113°F (0° to 45°C) SF350-48P, SF350-48MP, SG350-28MP 32° to 122°F (0° to 50°C) |
|
Storage Temperature |
–4° to 158°F (–20° to 70°C) |
|
Operating Humidity |
10% to 90%, relative, noncondensing |
|
Storage Humidity |
10% to 90%, relative, noncondensing |
Reviews
There are no reviews yet.